Product Type
Show more info

A8SIC42 (RP8si 1070 CA)

Raven RP8Si Door Bottom Seal

A concealed, acoustic automatic door bottom seal. RP8 Si has the addition of an extruded silicon sealing gasket for medium temperature smoke / fire door applications.

RP8Si is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres. Mounted onto a 15 mm x 34 mm groove that has been mortised into the bottom edge of the door, it is operated automatically by pressure against the door jamb on its adjustable strike block.

RP8 Si can also be fitted into the bottom hollow rail of an aluminium door by the fabricator.

Door Bottom Seals

Seals that are designed to fill the gap between the bottom of a door and the floor are called Door Bottom Seals.

There are two common versions of these seals; the mechanically lifting automatic seal and the sweep seal. The operation of both of these seals is enhanced when they are used in conjunction with a low profile threshold plate which has been fixed to the sill immediately under the door.

The automatic door bottom seal lifts automatically as the door is opened and conversely lowers to seal as the door is closed. This ensures that the seal does not impede the normal function of the door, allowing the seal to lift clear of carpets and other obstacles. They look neat if face mounted to the door and some versions can even be fully morticed into the door, out of sight.

The sweep seal operates by bringing a flexible seal, mounted on the door, into contact with a low profile threshold plate. The seals are often made of a strip of flexible PVC (rubber or brush) mounted into an aluminium holder.

Note: Ensure that the floor surface is lower than the sealing surface of the threshold plate to avoid sweep seal from fouling.